For me, watching the 2000 Senior Laser
Worlds in Cancun was memorable for several reasons – we had fantastic sailing
conditions, the way Ben Ainslie was able to catch Robert Scheidt on the
reaches, and the talk about the upcoming talent of sailors like Maciej Grabowski from Poland.
Since then, Maciej
has won many international Laser events, has represented Poland at
three Olympic Games, and has recently won the
Apprentice Master Worlds in Split .
Here’s how he trained, what he learned about the new composite top section, how he sets his MK2 sail differently, and how he sailed downwind to convincingly win in a small but very competitive fleet.
By Maciej Grabowski
I was really looking forward to coming to
Split this year. It was the first time that my whole family came with me to Croatia and
it was fun having the kids around in the boat park.
Olympic coaching
Sailing wise I did not feel ready at all.
The small Apprentice fleet was not helping my chances. Neither was the little
sailing I did since the 2015 Laser senior worlds. But going back to last
January, I was invited by Kacper Zieminski (POL), who secured his Olympic spot
for Rio games
during 2015 Kingston Laser Worlds, to coach him during the Miami OCR. Spending
a couple of weeks in Florida is
always nice especially when the weather is really bad around here so I decided to go
for what was supposed be a one-time only coaching trip.
But as it turned out, soon after Kacper
asked me to join him for the remainder of his Olympic campaign and I ended up
on the Polish Olympic Team as Laser coach. As much fun as it was, all those
months prior to the games were really intense and I had to combine it with my
regular job. Fortunately, I work for my father who took it easy on me and I was
able to work a bit out of the office.
Anyway I ended up being a coach and not
sailing Lasers for all of 2016. In late December, I bought a new Laser but
was not able to use it until May when I went for a week to sail at Lake
Garda , Italy .
Since then, I only did seven days of racing in Poland at
two senior events and one more week in Garda.
The composite top section and MK2 sail
During my second Polish event at the
nationals, we had a nice 70 boat fleet and I felt really good in the boat so my
expectations were up. The first day was maybe 10-15 knots and I decided to use
my aluminum mast with Hyde sail, whereas all the top guys used composite and
NeilPryde. I believe it was the 2nd race on day 1 when the wind was
down to 10 knots and I managed to move from 4th at the top mark
to maybe a 10 boat length lead at the bottom gate. In 10 knots I was really
quick and felt comfortable before the second beat.
However the choppy water made a
difference and the guy behind me started closing the gap and eventually passed
me. Not only did he pass me but put another 50m on me during second part of the
upwind. Despite a tight cover, he was able to get away.
What I noticed was that he would simply
accelerate a bit quicker. We both would hit couple of waves, slow down but he
would just recover faster. Of course I knew those guys spent really long hours
training this year, but we did some racing all with aluminum masts a few weeks
earlier and I knew that it was not only their fitness, technique, and time in
the boat that was paying off. It had to be some influence of different
equipment, something that I like to play with a lot myself too, but this year there
was simply not enough time.
I haven’t done much sailing with a composite
top section prior to the worlds but those couple of days I did sail in Poland were
difficult ones. With more than 10 knots I was really struggling and ended up
racing those two Polish events with aluminum top mast. However I knew that
sooner or later there was no way back from a composite top.
Training in Split
Arriving to Croatia I
was hoping to use the seven days before the event mostly to select the mast and
sail I was going to use. I was lucky to have Brett
Bayer (AUS) bring a NeilPryde sail for me which I thought would be
better with the composite top section I was going to use.
So I started sailing in Split with
a composite top and new sail. At the beginning it was looking really bad. I
could not keep up with the guys I was training with. I was slower and even
with a lot of effort I was able to be fast enough only a short while (we did
some speed tests and I was able to keep up for 2-3 minutes) and I knew that in
a regular race I would not last for the whole race.
Since I was mostly sailing with Brett and
couple other guys from the Masters fleet, I knew that they were in a good shape
but could not believe it was only better hiking causing so much speed
difference. So I figured I needed to start looking elsewhere. First of course I
would pay more attention to what the other guys were doing regarding their sail
tuning (I was still at almost zero cunningham and big vang tension which is
fast for the MK1 sail). Additionally I looked online at some photos from
previous senior events just to have some reference regarding the sail trim.
What got me thinking was the sail damage happening in the senior fleet because several straps at the top of the sail were ripping. I’m not sure how many sails ripped and believe it was close to 20. Apparently, the stitching that attached the strap that limits the mast movement in the mast sleeve could not hold the big cunningham loads. This is what got me thinking about the cunningham because the sails would break when rounding the top mark with full tension. Surprisingly, this was only happening to Hyde sails and it turned out that the NeilPryde sails had more stitching at the sail head.
So I
started asking how they set their sails, meaning vang, cunningham
etc. As it turned out, the way I was trimming the MK2 was wrong - I was doing
it the MK1 style, meaning no cunningham even in a big breeze, and it was not
working with the MK2 sail.
What got me thinking was the sail damage happening in the senior fleet because several straps at the top of the sail were ripping. I’m not sure how many sails ripped and believe it was close to 20. Apparently, the stitching that attached the strap that limits the mast movement in the mast sleeve could not hold the big cunningham loads. This is what got me thinking about the cunningham because the sails would break when rounding the top mark with full tension. Surprisingly, this was only happening to Hyde sails and it turned out that the NeilPryde sails had more stitching at the sail head.
My old way of setting the MK2 sail - loose cunningham, lots of vang, and overpowered.
It's faster having lots more cunningham.
This was a turning point for me, and from
then on my upwind speed got at a level that I knew I was able to keep up with
the rest of the fleet.
Competing in Split
For the worlds at Split ,
there was not really that much wind that having enough Cunningham tension was
that relevant. I still would play a lot with this adjustment whenever breeze
was up a bit. For me I’d say that learning how to trim the sail properly was
more of a confidence boost so I knew I’d be competitive in 12 knots up.
The Apprentice fleet had only 14 boats,
and Adonis Bougiouris (GRE) and Maksim Semerkhanov (RUS) were guys I knew from
the World Cup circuit. I knew they did so much more sailing those past years
than I did and it was not making me feel too comfortable before the regatta.
Back in 2014 in Hyères I won first 4 races but from then on the breeze picked
up and Adonis managed to beat me in what was looking like a match racing
competition. I was really disappointed back then and was anxious not to let it
happen again.
Because of the size of our fleet, I knew
that I would have to keep an eye on both Adonis and Maxim and kind of let the
other boats sail on their own. I’m sure it was a kind of an awkward view seeing
the three of us sailing a separate race, but I knew it had to be like that.
Adonis was actually the one trying to sail on his own in some of the races and
it cost him few paces.
When I look back at it now, is sounds
funny after winning all of the races, but right after the first start Adonis
was to windward of me and he managed to roll over me with so such ease that I
said to myself that there was no chance I was able to keep up with
him. But I slowly started to get in the shift rhythm and arrived at the
top mark maybe 3-4 boat lengths behind Adonis. Lucky I was at my (almost)
senior speed downwind so I put maybe extra 10 boat lengths on both Adonis and
Maxim on the first run.
I think that in every next race I was a
little quicker upwind. But it was my downwind speed/technique that was winning
races.
Downwind sailing
Regarding sailing downwind I could probably write many pages about
it. The way I see it looking at the masters fleet, is that most guys were
competing before downwind sailing techniques introduced the S sailing - meaning
changing course when sailing downwind by either heading up or bearing
off in order to get on more waves.
This is a way more complicated and sophisticated technique than it
sounds. It is not only about going at a different angle than dead downwind. It
is about being aware of how you need to adjust your sail, hull, position body in the boat – all in order to get on a wave a bit quicker. Even going by the lee is a
skill - you obviously can’t go by the lee forever and getting back to the mark is an important part of the game. But to make it short, I think that for most of the masters fleet, this technique is something new, something they didn’t have a
chance to learn properly.
There are of course some guys doing it better than others, but it
is still possible to gain 200m or so during single downwind. It won’t happen in
all conditions of course but this is something that all masters could work on.
Other than that there is really not that much difference between
masters (in any category) and the senior fleet. Many masters would be
competitive enough and fast enough upwind to be sailing senior’s gold fleet.
But the downwind is something that makes all the difference.
The challenge with downwind training is that you would need to
sail upwind for 2 hours in order to sail downwind for 30 minutes. And you need
long hours sailing only downwind.
We used to go to lake Garda and train with the northerly wind early in
the morning and sail from 8 until 11, break for lunch, wait for the wind to turn
to southerly and sail back downwind again for another 3 hours.
Back in 2003 I used to train a lot with Mark Mendelblatt (USA). He
invited me over to the US to train with him prior to the US Olympic trials. He already
finished 6th at 2003 Laser Worlds, myself I just finished 3rd at
the Laser Europeans (in Split )
so we made a good training team.
The problem with Mark was that he was pretty slow downwind, so our
focus was to make him a bit more competitive for the trials. We spent two weeks
training in Oregon on Columbia
River doing 20-25 miles downwind every second day. After moving to
Texas for the
trials we kept training for another two weeks with 75% of time focused on
downwind. Mark eventually won the trials and finished 2nd at
2004 Laser Worlds. He was never the one gaining downwind like many of us were, but
he stopped losing.
To sum up
So this ended up being my plan for the Split world championship
– sticking with the guys going upwind and passing them downwind. Doesn’t sound
like very exciting sailing but it actually was. I knew I had to stay focused
because of what happened in 2014 in Hyères. On the last day Adonis made it a
bit easier for Maxim because he was late for the last race with a black flag so we
ended up match racing with Maxim, and was only able to pass him halfway up the
last short upwind to the finish. This ended up being the race I was most happy
with.
Looking back at the event with a two
month perspective, I’m afraid that if ILCA doesn’t do something with the
regatta format, the Apprentice fleet will be gone soon. It was a bit disappointing
racing only few boats after driving 1600km. Back in 2015 my home club was
hosting Masters Europeans and all fleets sailed together. It made racing really
fun.